Recent Appliance Repair Projects in Simi Valley & Nearby Areas

This LG refrigerator wasn’t cooling properly because of a failed condenser fan motor and a dirty condenser coil. We replaced the fan motor, cleaned the condenser, and confirmed that the refrigerator was cooling properly again.

We replaced the failed sump pump assembly after the dishwasher started but stopped during the wash cycle, then tested it for proper operation.

This Whirlpool refrigerator wasn’t cooling because of a refrigerant leak in the evaporator coil. We replaced the leaking evaporator coil and confirmed that the refrigerator returned to normal cooling.

This Frigidaire refrigerator wasn’t cooling properly because of a refrigerant leak in the evaporator coil. We replaced the evaporator coil, recharged the system, and confirmed that the refrigerator returned to normal cooling.

This Samsung refrigerator door wasn’t closing properly because of a damaged center door mullion. We replaced the mullion assembly and confirmed that the door was closing and sealing correctly again.

The dryer in this LG WashTower wasn’t drying clothes because of a failed high-limit thermostat. We replaced the thermostat and confirmed that the dryer returned to normal heating and drying performance.

This LG washer-dryer combo wasn’t drying clothes properly because buildup on the coil was restricting airflow. We thoroughly cleaned the coil and confirmed that the unit returned to normal drying performance.

This Whirlpool refrigerator wasn’t cooling properly because of a failed evaporator fan motor. We replaced the motor and confirmed that both the refrigerator and freezer compartments were cooling normally again.

This LG built-in microwave was running but not heating due to a failed magnetron. We replaced the magnetron and thoroughly tested the microwave. It is now heating properly and working great again.

This Whirlpool dryer was making excessive noise because of a worn drum roller, while heavy internal lint buildup created a serious fire hazard. We replaced the roller, thoroughly cleaned the dryer, and confirmed normal operation.

This Sub-Zero refrigerator wasn’t dispensing water or ice because of a failed dispenser control board. We replaced the control board and confirmed that both the water and ice dispensers were working properly again.

This Samsung refrigerator wasn’t dispensing ice because of a failed ice-dispenser motor. We replaced the motor and confirmed that the ice dispenser was working properly again.

This GE refrigerator wasn’t producing ice because of a failed ice maker. We replaced the ice-maker assembly and confirmed that it returned to normal operation.

This KitchenAid dishwasher wasn’t releasing detergent because of a failed dispenser motor. We replaced the motor and confirmed that the detergent was dispensing at the correct time and the dishwasher was washing properly.

This LG dishwasher wasn’t starting the wash cycle because of a failed door latch. We replaced the latch and confirmed that the dishwasher was starting and operating properly again.

This Whirlpool refrigerator wasn’t cooling properly because of a failed evaporator fan motor. We replaced the motor and confirmed that the refrigerator returned to normal cooling and operation.

This GE refrigerator was getting too warm because of a failed control board and evaporator fan motor. We replaced both components and confirmed that the refrigerator returned to normal cooling.

This Speed Queen washer wasn’t spinning because of a faulty drive belt. We replaced the belt, cleaned and serviced the washer, and tested it to confirm proper operation.

This LG dryer was taking too long to dry because the vent duct was excessively long and improperly routed. We removed the excess ducting, shortened the vent connection, and restored proper airflow for improved drying performance.

Excessive ice buildup around the evaporator fan prevented this Samsung refrigerator from cooling properly. We installed a supplemental heater, cleared the drain line, and confirmed that the refrigerator was operating correctly.

This LG refrigerator wasn’t cooling properly because of a refrigerant leak in the evaporator coil. We replaced the leaking evaporator coil and confirmed that the refrigerator returned to normal cooling.

This GE refrigerator had excessive frost buildup around the evaporator coil because of a failed evaporator fan motor. We replaced the fan motor and confirmed that the refrigerator returned to normal cooling.

This LG dryer was taking too long to dry because heavy lint buildup was restricting airflow. We completed a detailed internal cleaning and confirmed that the dryer returned to normal drying performance.

This KitchenAid dishwasher wasn’t washing dishes properly because of a failed circulation pump. We replaced the pump and confirmed that the dishwasher returned to normal washing and operation.

This LG dishwasher wasn’t completing the wash cycle because of a failed sump pump assembly. We replaced the assembly and confirmed that the dishwasher was washing and operating properly again.

This Samsung front-load washer wasn’t draining because of a failed drain pump. We replaced the pump and confirmed that the washer was draining and completing the spin cycle properly.

This Whirlpool top-freezer refrigerator had excessive ice buildup around the evaporator coil because of a failed defrost heater. We replaced the heater and confirmed that the refrigerator returned to normal operation.

This GE top-load washer was leaking, making excessive noise, and not spinning properly because of a failed transmission assembly. We replaced the assembly and confirmed that the washer was operating properly again.

This LG refrigerator wasn’t cooling because of a failed compressor. We replaced the compressor and confirmed that the refrigerator returned to normal cooling and operation.

This Samsung refrigerator wasn’t cooling properly because of a refrigerant leak in the evaporator coil. We replaced the leaking evaporator and confirmed that the refrigerator returned to normal cooling.

This LG dryer was making a loud noise because of a failed drum roller. We replaced the roller, removed the heavy internal lint buildup that presented a fire hazard, and confirmed proper operation.

This Whirlpool refrigerator had excessive ice buildup around the evaporator because of a failed defrost heater. We replaced the heater and confirmed that the refrigerator returned to normal cooling and operation.

This Maytag front-load washer was shaking excessively during the wash and spin cycles because of worn shock absorbers. We replaced the shocks and confirmed that the washer was spinning smoothly without excessive vibration.